# Services confda Yazdiginiz Kismin Aynisini Yaziniz 

Module protocol/unreal 

    # NetworkDomain domain  [RECOMMENDED] 
    #     Protocols: bahamut, dalnet, dreamforge, monkey, ptlink, rfc1459, 
    #                trircd, ts8, undernet-p9 
    # 
    # Network Domaini 

    #NetworkDomain   "EROIN" 

    # CSSetChannelTime  [OPTIONAL] 
    #     Protocols: bahamut, monkey, trircd, unreal 
    # 
    # 

    CSSetChannelTime 

    # ServerNumeric <numeric>  [RECOMMENDED] 
    #     Protocols: unreal 
    # 
    # Sadece Unreal için Açiniz 

    ServerNumeric   1 

    # SetServerTimes [<time>]  [RECOMMENDED] 
    #     Protocols: unreal 
    # 
    # Sadece Unreal için Açiniz 

    SetServerTimes 
    #SetServerTimes 12h 

EndModule 

########################################################################### 
# 
# Eger Auth Kodu Aktif Ettiyseniz Burayi Ayarlayiniz 
# 
########################################################################### 

Module mail/main 

    # FromAddress <email>  [REQUIRED] 
    # Giden Mail Adres 

    FromAddress services@irc.eroin.org

    # FromName <name>  [OPTIONAL] 
    # Görünecek Isim 

    FromName "EROIN" 

EndModule 

################################ Sendmail-based low-level module 

Module mail/sendmail 

    # SendmailPath <path>  [REQUIRED] 
    #     Specifies the full path to the "sendmail" program to be used to 
    #     send mail.  This program must accept a command-line option "-t" 
    #     to extract recipient addresses from a mail message given on 
    #     standard input (the standard "sendmail" program does this). 
    #     The program will be executed with the same environment as 
    #     Services itself is run with. 

    SendmailPath /usr/lib/sendmail 

EndModule 

################################ SMTP-based low-level module 

Module mail/smtp 

    # RelayHost <hostname>  [REQUIRED] 
    #     Specifies the host to which all mail will be sent, e.g. your 
    #     local mail server. 

    RelayHost   mail.eroin.org

    # SMTPName <hostname>  [REQUIRED] 
    #     Specifies the hostname Services will use in the HELO command to 
    #     the remote server.  Normally, this should be set to the same as 
    #     the hostname of the machine Services runs on. 

    SMTPName   services.eroin.org

    # MaxSockets <count>  [REQUIRED] 
    #     Specifies the maximum number of sockets to the mail server which 
    #     can be open at once. 

    MaxSockets   100 

EndModule 

########################################################################### 
# 
# OperServ configuration 
# 
########################################################################### 

Module operserv/main 

    OperServName   "OperServ"   "Operator Server" 
    GlobalName      "DUYURU"   "Global Noticer" 
    OperServDB      "oper.db" 

    # ServicesRoot <nick>  [REQUIRED] 
    #     Specifies the Services "super-user".  The super-user, or "root" as 
    # Services Root Nickini Yaziniz 

    ServicesRoot   Raistlin
    KillClonesAutokill   30d
    AllowRaw 
    #WallOper 
    #WallBadOS 
    #WallOSChannel 
    WallSU 

EndModule 


Module operserv/akill 
    AutokillDB      "akill.db" 
    AutokillReason "Sunucuya girisiniz engellenmistir." 
    #AutokillReason "Autokilled: %s" 
    AutokillExpiry   30d 
    AkillChanExpiry   7d 
    #OperMaxExpiry   7d 
    #EnableExclude 
    ExcludeReason "IRC operator host" 
    #ExcludeReason "Excluded from autokills: %s" 
    ExcludeExpiry   30d 
    #ImmediatelySendAutokill 
    #WallOSAkill 
    #WallAutokillExpire 

EndModule 


Module operserv/news 
    NewsDB      "news.db" 

EndModule 

Module operserv/sessions 

    ExceptionDB      "exception.db" 
    # Kaç Giris Olacak 8 Normal 
    DefSessionLimit   12 
    
    MaxSessionLimit   100 
  
    ExceptionExpiry   1d 

    SessionLimitExceeded "The session limit for your host% has been exceeded." 

    #SessionLimitDetailsLoc "Please visithttp://your.website.url for more information about session limits." 

  
    #SessionLimitAutokill 10s 5 30m "Exceeding session limit" 

    #WallOSException 

    #WallExceptionExpire 

EndModule 

################################ S-line module settings 

Module operserv/sline 

    SlineDB      "sline.db" 

    SGlineReason "Invalid real name" 
    #SGlineReason "Invalid real name: %s" 
    SQlineReason "Reserved nickname" 
    SQlineReason "Kullandığınız rumuz kullanıma kapalı yada bir yöneticiye ait: %s" 

    SZlineReason "You are banned from this network" 
    #SZlineReason "Z-lined: %s" 

    #ImmediatelySendSline 
    SGlineExpiry   30d 
    #SQlineExpiry   30d 
    SZlineExpiry   30d 
    #WallOSSline 
    #WallSlineExpire 
    SQlineIgnoreOpers 
    SQlineKill 

EndModule 

########################################################################### 
# 
# NickServ configuration 
# 
########################################################################### 

Module nickserv/main 

    NickServName   "NickServ"   "Nickname Server" 
    NickServDB      "nick.db" 
    NSEnableRegister 
    NSRegEmailMax   3 
    NSRequireEmail 
    NSRegDelay      5m 
    #NSInitialRegDelay   30s 
    NSDefKill 
    #NSDefKillQuick 
    NSDefSecure 
    #NSDefPrivate 
    #NSDefHideEmail 
    #NSDefHideUsermask 
    #NSDefHideQuit 
    NSDefMemoSignon 
    NSDefMemoReceive 
    NSExpire      30d 
    NSExpireWarning   3d 
    NSSuspendExpire   25d 5d 
    NSShowPassword 
    NSEnforcerUser   enforcer 
    #NSEnforcerUser   enforcer@eroin.org
    NSForceNickChange 
    NSReleaseTimeout   30s 
    #NSAllowKillImmed 
    NSListOpersOnly 
    NSListMax      50 
    NSSecureAdmins 
    NSEnableDropEmail 
    NSDropEmailExpire 10m 
    NSHelpWarning 

EndModule 

################################ Access list module 

Module nickserv/access 

    NSAccessMax      32 
    NSFirstAccessEnable 
    NSFirstAccessWild 

EndModule 

################################ Autojoin module 

Module nickserv/autojoin 
    NSAutojoinMax      10 

EndModule 

################################ Link module 

Module nickserv/link 

    NSLinkMax      2

EndModule 

################################ Authentication module 

Module nickserv/mail-auth 

    
    NSNoAuthExpire   3m 
    NSSendauthDelay   1h 

EndModule 

################################ SENDPASS module 

Module nickserv/sendpass 

    NSSendpassDelay   1h 

EndModule 

########################################################################### 
# 
# ChanServ configuration 
# 
########################################################################### 

Module chanserv/main 


    ChanServName   "ChanServ"   "Channel Server" 


    ChanServDB      "chan.db" 
    CSEnableRegister 
    #CSRegisteredOnly 
    CSMaxReg   3 
    CSDefKeepTopic 
    CSDefSecureOps 
    #CSDefPrivate 
    CSDefTopicLock 
    CSDefLeaveOps 
    #CSDefSecure 
    CSDefOpNotice 
    #CSDefEnforce 
    #CSDefHideEmail 
    #CSDefHideTopic 
    #CSDefHideMlock 
    CSExpire   14d 
    CSSuspendExpire 12d 2d 
    CSShowPassword 
    CSAccessMax   1024 
    CSAutokickMax   80 
    CSAutokickReason "User has been banned from the channel" 
    CSInhabit   15s 
    CSRestrictDelay   15s 
    CSListOpersOnly 
    CSListMax   50 
    CSForbidShortChannel 

EndModule 

################################ SENDPASS module 

Module chanserv/sendpass 

    CSSendpassDelay   1h 

EndModule 

########################################################################### 
# 
# MemoServ configuration 
# 
########################################################################### 

Module memoserv/main 

    MemoServName   "MemoServ"   "Memo Server" 
    MSMaxMemos   20 
    #MSExpire   1500d 
    #MSExpireUnread 
    MSSendDelay   3s 
    MSNotifyAll 

EndModule 

################################ FORWARD module 

Module memoserv/forward 

    MSAllowForward 
    MSForwardDelay   10s 

EndModule 

################################ IGNORE module 

Module memoserv/ignore 

    MSIgnoreMax   32 

EndModule 

########################################################################### 
# 
# StatServ configuration 
# 
########################################################################### 

Module statserv/main 

    StatServName   "StatServ"   "Statistics Server" 
    StatServDB      "stats.db" 
    SSOpersOnly 

EndModule 



# Burdan Asagidaki Ayarlar Biraz Karisik 
# O Yüzden Lütfen Dokunmayiniz. Basinda Açiklama Olmayan Satirlara 
# Dokunmaniz Tavsiye Edilmez. 
########################################################################### 
# 
# HTTP server modules 
# 
########################################################################### 

Module httpd/main 

    # ListenTo <address>:<port>  [REQUIRED] 
    #     Specifies the address and port number on which the HTTP server 
    #     will listen for incoming requests.  <address> may be specified as 
    #     an IP address (first example below), a hostname (second example), 
    #     or the special string "*", which means "any IP address" (third 
    #     example). 
    # 
    #     When a hostname is given, as in the second example below, 
    #     Services will look up the address(es) associated with the 
    #     hostname at startup time, and bind to every IP address found. 
    #     This can be useful, for example, with dynamic DNS, in which 
    #     the server's IP address changes periodically; however, the 
    #     hostname lookup can take time--especially if there is no DNS 
    #     server on the local network--and is susceptible to network or 
    #     DNS server outages, so IP addresses or "*" should be used 
    #     whenever possible. 
    # 
    #     Note that many systems restrict low port numbers to the system 
    #     administrator; in particular, Unix-like systems allow only the 
    #     root user (UID 0) to use ports less than 1024. 

    #ListenTo 127.0.0.1:12701 
    #ListenTo services.example.net:8080 
    #ListenTo *:80 

    # ListenBacklog  [REQUIRED] 
    #     Specifies the maximum number of connections that can be received 
    #     by the operating system without being accepted by Services (the 
    #     second parameter, `backlog', to the listen() system call).  If 
    #     you start seeing refused or delayed connections on a busy server, 
    #     try increasing this value. 
    # 
    #     If you don't understand the above, leave this setting alone. 

    ListenBacklog   5 

    # RequestBufferSize <bytes>  [REQUIRED] 
    #     Specifies the size of the buffer allocated for each HTTP request. 
    #     Note that this buffer is allocated for every connection, and an 
    #     additional amount of memory will be allocated for header pointers 
    #     (in the pathological case this extra amount could reach 4/3 of 
    #     the value given for this directive).  If a client sends a request 
    #     (including POST data) exceeding this value, an error will be 
    #     returned and the connection terminated. 
    # 
    #     If you don't understand the above, leave this setting alone. 

    RequestBufferSize   4096 

    # MaxConnections <count>  [RECOMMENDED] 
    #     Specifies the maximum number of simultaneous connections allowed. 
    #     If not given, no limit is placed on the number of connections; 
    #     however, the operating system may impose its own limits, which 
    #     are not under the control of Services. 

    MaxConnections   10 

    # MaxRequests <count>  [RECOMMENDED] 
    #     Specifies the maximum number of requests that can be made over a 
    #     single connection before the server disconnects it.  If not 
    #     given, no limit is placed on the number of requests per 
    #     connection; note that this may allow malicious users to interfere 
    #     with Services' normal operations by sending large numbers of 
    #     requests over a single connection. 

    MaxRequests      20 

    # IdleTimeout <time>  [RECOMMENDED] 
    #     Specifies the length of time a connection can be idle (not 
    #     sending data) before it will be automatically closed.  If not 
    #     given, connections will never be closed automatically. 

    IdleTimeout      30s 

    # LogConnections  [OPTIONAL] 
    #     If given, a log message will be written for each connection to 
    #     the server. 

    LogConnections 

EndModule 

################################ IP address authorization module 

Module httpd/auth-ip 

    # AllowHost <path> <address>  [OPTIONAL] 
    # DenyHost <path> <address>  [OPTIONAL] 
    #     Specifies which hosts will be allowed (or not allowed) to access 
    #     resources provided by the HTTP server.  The <path> parameter is a 
    #     URL path (not including the "http://host.name"), and matches any 
    #     URL which begins with the same string; for example, "/dir" 
    #     matches both "/dir/file" and "/dirty".  The <address> can be an 
    #     IP address, a hostname (as with ListenTo in the main server 
    #     module, all addresses associated with the hostname will be 
    #     allowed or denied), the string "*" (which means all addresses), 
    #     or the special format "<IP-address>/<mask>", where <mask> is an 
    #     integer from 1 to 31 giving the number of bits in the subnet 
    #     address, which indicates that the entire subnet of addressess 
    #     specified should be allowed or denied; for example, 
    #     "192.168.1.64/26" represents the range of addresses from 
    #     192.168.1.64 to 192.168.1.127. 
    # 
    #     Examples: 
    #        AllowHost /debug 127.0.0.1   # Allow all requests from localhost 
    #                                     #   to the debug page 
    #        AllowHost / 192.168.0.0/24   # Allow any host in the 192.168.0.* 
    #                                     #   network access to the entire server 
    #        DenyHost / shell.example.org # Deny connections from any address 
    #                                     #   associated with shell.example.org 
    # 
    #     Multiple AllowHost or DenyHost directives for the same path may 
    #     be used to specify multiple addresses to allow or deny.  Each 
    #     condition will be checked in the order they are listed here, and 
    #     the first matching one will be used.  For example, these lines: 
    #        AllowHost / 192.168.0.1 
    #        DenyHost  / 192.168.0.0/24 
    #     deny access to all hosts in the 192.168.0.* network _except_ 
    #     192.168.0.1.  However, the reverse: 
    #        DenyHost  / 192.168.0.0/24 
    #        AllowHost / 192.168.0.1 
    #     simply blocks all hosts in the 192.168.0.* network, since the 
    #     first rule matches 192.168.0.1 and the second is never checked. 
    # 
    #     Access to the entire server can be allowed or denied by using the 
    #     path "/", which matches every URL (since all URLs begin with a 
    #     slash).  It is good practice to include such a rule after all 
    #     others to explicitly indicate what should be done with requests 
    #     that do not match any other rule.  (If a request does not match 
    #     any rules at all, it is implicitly allowed, but this behavior may 
    #     change in the future and should not be relied on.)  For example: 
    #        AllowHost / * 
    #     or: 
    #        DenyHost / * 
    # 
    #     WARNING: Hostnames are resolved only once at startup; any changes 
    #              in a host's IP address will not be seen by Services. 
    # 
    #     Note: These directives are listed as "optional" only because the 
    #           module will still load even if no directives are listed; 
    #           however, unless AllowHost/DenyHost directives are given, 
    #           the module will not have any effect. 

    AllowHost / * 

EndModule 

################################ Password authorization module 

Module httpd/auth-password 

    # AuthName <name>  [REQUIRED] 
    #     Specifies the name to be used by the user's browser when asking 
    #     for a password (as in "Enter username and password for <name>:"). 

    AuthName      "IRC Services" 

    # Protect <path> <user>:<pass>  [OPTIONAL] 
    #     Sets the URLs (paths) which will be protected by password 
    #     authorization, and the username and password for each path.  The 
    #     username and password can be different for each path.  The path 
    #     given will match any URL beginning with that string, as with the 
    #     auth-ip module. 
    # 
    #     Examples: 
    #         Protect   /debug   "debug:debug" 
    #         Protect   /~   "nickuser:nickpass" 
    # 
    #     Note: This directive is listed as "optional" only because the 
    #           module will still load even if no directives are listed; 
    #           however, unless Protect directives are given, the module 
    #           will not have any effect.  Use a path of "/" to apply 
    #           password protection to the entire server. 

EndModule 

################################ Database access module 

Module httpd/dbaccess 

# NOTICE: This module allows complete access to all Services data; 
#         be certain to protect it from unauthorized access using 
#         authorization modules or other means. 

    # Prefix <path>  [REQUIRED] 
    #     Sets the URL (path) at which database access will be accessible. 
    #     If this does not end with a slash, one will be appended 
    #     automatically.  Access is provided using the following directory 
    #     tree: 
    # 
    #         <path>/                   Main menu 
    #         <path>/operserv/          OperServ data and menu 
    #         <path>/operserv/akill/    Autokill list 
    #         <path>/operserv/news/     News item list 
    #         <path>/operserv/sessions/ Session and exception lists 
    #         <path>/operserv/sline/    S-line lists 
    #         <path>/nickserv/          Nickname list and information 
    #         <path>/chanserv/          Channel list and information 
    #         <path>/statserv/          Network statistics 
    #         <path>/xml-export/        XML-format database download 
    # 
    #     Categories for which the relevant module is not loaded will not 
    #     be accessible. 
    # 
    #     WARNING: These functions, particularly the XML export function, 
    #              can cause Services to stop for a significant period of 
    #              time while they are processed! 
    # 
    #     This is commented out by default; make sure you implement proper 
    #     access protection (see above) before uncommenting it. 

    #Prefix      "/dbaccess" 

EndModule 

################################ Debug page module 

Module httpd/debug 

    # DebugURL <path>  [REQUIRED] 
    #     Sets the URL (path) at which the debug page will be accessible. 
    #     This must begin with a slash. 

    DebugURL      "/debug" 

EndModule 

################################ Nick/channel redirect module 

Module httpd/redirect 

    # NicknamePrefix <path>  [OPTIONAL] 
    #     Sets the URL (path) at which nickname redirects will be 
    #     accessible; all characters after this prefix, up to the next 
    #     slash, will be taken as the nickname.  This must begin with a 
    #     slash.  The default value, "/~", emulates the traditional home 
    #     page URL of "http://www.example.net/~username/".  If you use a 
    #     directory name instead, it must end with a slash, for example: 
    #     "/nickname/".  See also ChannelPrefix, below. 
    # 
    #     If not set, nickname redirects will not be done. 

    NicknamePrefix      "/~" 

    # ChannelPrefix <path>  [OPTIONAL] 
    #     Sets the URL (path) at which channel redirects will be 
    #     accessible; all characters after this prefix, up to the next 
    #     slash, will be taken as the channel name (without the leading 
    #     "#", which cannot be used in URLs).  The path must begin with 
    #     a slash.  The default value, "/channel/", gives URLs like 
    #     "http://services.example.net/channels/channelname/" for channel 
    #     "#channelname". 
    # 
    #     If not set, channel redirects will not be done. 
    # 
    #     Note: If a URL could be interpreted as both a nickname URL and a 
    #           channel URL, the nickname will take precedence, even if it 
    #           is not registered or does not have a URL associated with it. 

    ChannelPrefix   "/channel/" 

EndModule 

################################ Top page module 

Module httpd/top-page 

    # Filename <path> [<content-type>]  [OPTIONAL] 
    #     Sets the name of a file to be delivered as the server's top page. 
    #     If this does not begin with a slash, then it is taken as relative 
    #     to the Services data directory.  The second parameter specifies 
    #     the MIME content type of the file; if not given, it defaults to 
    #     text/html. 

    #Filename   "Top Page.txt" text/plain 
    #Filename   /var/www/html/ircservices/top-page.html 

    # Redirect <URL>  [OPTIONAL] 
    #     Sets a URL to be provided as a redirect to a client accessing the 
    #     top page.  This must be a full URL, beginning with "http://" (or 
    #     some other protocol specifier).  If both Filename and Redirect 
    #     are given, Redirect takes precedence. 

    #Redirect   http://www.example.net/ircservices/ 

EndModule 

########################################################################### 
# 
# Miscellaneous modules 
# 
########################################################################### 

################################ DevNull settings 

Module misc/devnull 

    # DevNullName <nick> <string>  [REQUIRED] 
    #     Specifies the nickname (first parameter) and "real" name (second 
    #     parameter) used by the DevNull pseudoclient. 

    DevNullName      "DevNull"   "/dev/null -- message sink" 

EndModule 

################################ HelpServ settings 

Module misc/helpserv 

    # HelpServName <nick> <string>  [REQUIRED] 
    #     Specifies the nickname (first parameter) and "real" name (second 
    #     parameter) used by the HelpServ pseudoclient. 

    HelpServName   "HelpServ"   "Help Server" 

    # HelpDir <dirname>  [REQUIRED] 
    #     Specifies the name of the subdirectory containing help files for 
    #     HelpServ. 

    HelpDir      helpfiles 

EndModule 

################################ XML export settings 

Module misc/xml-export 

# This module has no configurable settings. 

EndModule 

################################ XML import settings 

Module misc/xml-import 

    # OnNicknameCollision <action>  [OPTIONAL] 
    #     Specifies the action to be taken when a nickname in the data to 
    #     import is already registered.  The string must be one of either 
    #     "skipgroup" (skip over the nickname group containing the nickname 
    #     in the imported data), "skipnick" (skip only the colliding 
    #     nickname), "overwrite" (drop the existing nickname), or "abort" 
    #     (do not import any data).  Note that when "abort" is selected, 
    #     the entire XML input is still checked for errors, but Services 
    #     will abort before actually merging any data. 
    # 
    #     When using "overwrite", if a nickname group has only one nickname 
    #     and that nickname is overwritten, the nickname group will be 
    #     dropped as well.  As a consequence, any channels owned by such a 
    #     nickname will be dropped (or shifted to their successors) as 
    #     well.  All nicknames and channels overwritten or droppde in this 
    #     manner will be displayed on standard error. 
    # 
    #     If not specified, defaults to "skipgroup". 

    #OnNicknameCollision   skipgroup 

    # OnChannelCollision <action>  [OPTIONAL] 
    #     Specifies the action to be taken when a channel in the data to 
    #     import is already registered.  The string must be one of either 
    #     "skip" (skip over the channel in the imported data), "overwrite" 
    #     (drop the existing channel), or "abort" (do not import any data). 
    #     Note that when "abort" is selected, the entire XML input is still 
    #     checked for errors, but Services will abort before actually 
    #     merging any data.  If not specified, defaults to "skip". 

    #OnChannelCollision   skip 

    # VerboseImport  [OPTIONAL] 
    #     Causes a detailed list of imported nicknames, channels, and other 
    #     data to be printed to standard output. 

    VerboseImport 

EndModule